As a handyman, I know that safety should always be the top priority when it comes to installing safety bars in a tile shower. It's important to make sure that the bars are installed securely so that they can effectively support the weight of someone using them. I ensure that I have all the necessary tools and materials. I typically need a drill, drill bits, anchors, screws, sealant, and a level. Once I have everything I need, I begin the installation process. First, I locate the studs in the wall behind the tile. If the studs are not located in a convenient place for the safety bars, I use toggle bolts to secure the bars to the wall. Once I've identified the appropriate location for the safety bars, I use the level to make sure that they are straight. Then, I drill holes into the tile using a tile bit. I make sure to drill slowly and carefully to avoid cracking the tile. Once the holes are drilled, I insert anchors into them to provide a sturdy base for the screws. Finally, I apply sealant to the safety bar brackets and bolts, attach the safety bars to the wall and check to make sure that they are securely attached and able to support weight. Throughout the entire installation process, I remain cautious and focused on safety. It's important to take the time to do the job right so that the safety bars can effectively serve their purpose of helping to prevent slips and falls in the shower. If you want safety bars professionally installed - call us for quotes!