CERAMIC - PRO CAR NANO COATING 9H XTREME SYNTHETIC WAX POLISH PAINT PROTECTION

Product Description  

Made in USA.

Nano Ceramic coating works on all Paint Surfaces, Glass, Metal, including, Headlamps, Chrome, Bright Work, Aluminum and Polished surfaces. This ceramic coating is designed to work on all exterior Clear Coat paint surfaces for the ultimate shine and protection.

Ceramic Clear Coating is designed for use on all Automotive, Motorcycle, Marine, RV and Aviation finishes. 

Ceramic Clear Coating produces a slick, mirror like shine and fills in light swirl marks. It also produces exceptional water beading, and contains high UV and Corrosion protection to help prevent fading from harsh sun exposure.

Ceramic Clear Coating is Manufactured with Propriety Ceramic Resin Chemistry and Gloss Additives to provide Superior Bonding to Paint, Glass, Metal, Chrome, Plastic Lights and Rims. 

Ceramic Clear Coating is so durable it beads 20 X longer than ordinary Wax or Sealers.

Ceramic Clear Coating is the perfect choice for a long lasting and Durable Shine.

• Ceramic Clear Coating takes Paint Protection, Durability and Shine to a Whole New Level!
• Heat Resistant, Detergent Resistant and Anti-Static.
• Super Easy to Apply; Wipe on Wipe Off with a Properly Prepared Surface.
• Can be layered for additional Shine, Depth and Protection.
• Prevents Water Spots and Stains.
• Works on any color Vehicle, Motorcycle, RV, Boat or Plane.
• Hydrophobic Formula to Keep the Surfaces Cleaner, Longer!
• Durable Protection Against the Elements, Corrosion and UV Rays.
• Military Grade Quality.
• Produces a Slick, Mirror like Shine and Fills in Light Swirl Marks.

APPLICATION INSTRUCTIONS:

Clean the surface with CitraClean Car Wash, Wax & Silicone Remover

The cleaner the surface, the better the coating application

DO NOT APPLY TO HOT OR ON DIRTY PAINT SURFACES, IN DIRECT SUNLIGHT OR TEMPERATURE BELOW 50F.

PRECAUTIONS: 

• Contact with eyes may cause irritation.
• We recommend using rubber gloves and eye protection when applying ceramic coating; prolonged contact with skin may cause drying.
• Excessive inhalation of vapors can cause nasal irritation, dizziness, weakness, nausea, headache and a narcotic reaction. 
• If swallowed, may cause stomach cramps, nausea, vomiting and or diarrhea.
• Do not ingest.
• Use Ceramic Coating within one year from purchase.

1. Paint surface and all surfaces should be washed with CitraClean before application of ceramic coating. Use Clay Bar and Pure Polish to remove any scratches or blemishes before application of ceramic coating. The ceramic will only enhance and protect the surface that its being applied to. Wipe entire surface with isopropyl alcohol and dry thoroughly. Apply Ceramic Coating on the surface with micro fiber applicator, continue adding drops of ceramic coating during application.

2. Spread the ceramic coating around using soft applied straight, back and forth, crisscross and overlapping motion in small sections at a time.
   
   
3. We recommend wearing protective gloves to prevent the product drying out your skin.
   
   

  4.STEPS; 1 - Wipe off immediately after applying ceramic clear with the microfiber towel to remove excess liquid from the surface, 2 - Use a second microfiber towel to softly wipe again, 3 - Finalize the application of the ceramic coating by softly polishing the surface with a third clean microfiber towel. Three micro fiber towels are required to apply the ceramic coating. Do not re-use towels after one complete application, dispose towels after use. If the towels or applicator become hard during the ceramic coating application, then discard and use new applicator and towels.

5. For Up To 5 Years Protection two coats are required, you can reapply the ceramic coating after 1 hour curing time. 
   
   
6. Should you see any missed spots when project is done, simply re-apply Ceramic Coating to that small section to correct the area and follow the same steps outlined above.
7. Allow ceramic coating to cure for 12 hours before exposing to rain or water.

TECHNICAL INFORMATION & ASTM TEST REPORT

High Gloss Ceramic Clear

Gloss Level (DOI) Definition Of Image 602 Gloss Units at 60°

Theoretical Solids by Weight N/A

Theoretical Coverage - Motorcycle or One Small Car - 1oz/30ml

Viscosity (Brookfield Viscometer) 10.99 cP
Film Thickness 2 MICRONS/2000nm (ONE COAT)
5% Salt Spray (ASTM B117) 169 hours
Pencil Hardness (ASTM D3363) 9h
Scratch Hardness (ASTM D3363) 9h
Adhesion Cross-Cut Tape (ASTM D3359) 5B
Mandrel Bend (ASTM D522) 0 mm coating loss at 180o rotation
Impact (ASTM D2794) 120/80 inch-lbs