Complete Conical Kit | Spike Brewing
- 3 Port Stainless Steel Gas Manifold Bundle
- Closed Pressure Transfer Kit
- Stainless Steel 1.5 Tri-Clover Racking Arm + Tri-Clamp & Gasket
- 4" Tri-Clover Polycarbonate Cap
- Set of three Caster Wheels (or set of four Heavy Duty Casters for CF30)
- Extended Bracing Shelf for CF5 or CF10/CF15 (Not available for CF30)
- Your Choice of CF5, CF10, CF15, or CF30 Spike Conical Fermenter
- Gas Manifold Package
- Pressure Gauge
- Pressure Release Valve (PRV)
- Gas Post
Purging oxygen from your fermenters and using closed transfer processes allows you to make beer that has had virtually no contact with outside oxygen from when you pitch the yeast until when you pour the first pint. No more stale cardboard flavours from oxidation and longer shelf stability and aging potential!
Closed Pressure Transfer Kit:
Introducing another cool accessory to compliment out CF series conicals. Our closed pressure transfer kit (CPT kit) will allow you to rack your beer from your conical to keg without exposing it to the air. This will help you avoid off-flavours that can be caused by oxygen coming in contact with your beer.
Our CPT kit uses all stainless hardware and Ultra Barrier tubing which is antibacterial due to its silver lining. It is also BPA free and over-sized to promote a quick transfer from conical to keg.
Stainless Steel 1.5 Tri-Clover Racking Arm:
Another cool product Spike's engineers and in-house welders developed is this USA made racking arm. This racking arm provides 6" of total travel allowing you to draw clear wort even with the hoppiest of beers.
The racking arm also incorporates a position indicator that is welded on so the orientation of the racking arm can easily be seen from the outside of the sealed conical (especially useful in closed pressure transfers).
Specs:
- 1.5" TC
- 304SS
- Position indicator
- Works with every size conical
- Made in the USA
CF5/CF10/CF15/CF30 Conical Fermentor:
CF5 Features:
- 304 stainless steel; 1.2mm (18ga)
- All sanitary welded ports (no-weldless fittings)
- All hardware shown here is included!
- Designed for 2.5 to 6gal batches
- 7 gal total capacity
- 15psi working pressure (always use a 15psi pressure relief valve)
- Use for pressure transfers
- Use as a brite tank
- Etched volume markings
- 14" wide by 29" tall
- Fully polished finish
Lid Features:
- Stainless band clamp for attaching the lid
- Completely removable lid for easy cleaning
- 4" TC modular top port
- Allows for hop additions, temp control coil, top sight glass, etc
- (3) 1.5" TC ports which allow for:
Body Features:
- Huge 2" TC bottom dump with butterfly valves (no more stuck yeast dumps)
- 1.5" TC racking port with butterfly valve
- 1.5" TC sample valve (for taking gravity readings)
- 1.5" TC dial thermometer
CF10 Features:
- 304 stainless steel; 1.2mm (18ga)
- All sanitary welded ports (no-weldless fittings)
- All hardware shown here is included!
- Designed for 5 to 10gal batches
- 14 gal total capacity
- 15psi working pressure (always use a 15psi pressure relief valve)
- Use for pressure transfers
- Use as a brite tank
- Etched volume markings
- 17" wide by 35" tall
- Fully polished finish
Lid Features:
- Stainless band clamp for attaching the lid
- Completely removable lid for easy cleaning
- 4" TC modular top port
- Allows for hop additions, temp control coil, top sight glass, etc
- (3) 1.5" TC ports which allow for:
Body Features:
- Huge 2" TC bottom dump with butterfly valves (no more stuck yeast dumps)
- 1.5" TC racking port with butterfly valve
- 1.5" TC sample valve (for taking gravity readings)
- 1.5" TC dial thermometer
CF15 Features:
- 304 stainless steel; 1.2mm (18ga)
- All sanitary welded ports (no-weldless fittings)
- All hardware shown here is included!
- Designed for 5 to 1/2bbl batches
- 18 gal total capacity
- 15psi working pressure (always use a 15psi pressure relief valve)
- Use for pressure transfers
- Use as a brite tank
- Etched volume markings
- 17" wide by 39" tall
- Fully polished finish
Lid Features:
- Stainless band clamp for attaching the lid
- Completely removable lid for easy cleaning
- 4" TC modular top port
- Allows for hop additions, temp control coil, top sight glass, etc
- (3) 1.5" TC ports which allow for:
Body Features:
- Huge 2" TC bottom dump with butterfly valves (no more stuck yeast dumps)
- 1.5" TC racking port with butterfly valve
- 1.5" TC sample valve (for taking gravity readings)
- 1.5" TC dial thermometer
CF30 Features:
- 304 stainless steel; 1.5mm (16ga)
- All sanitary welded ports (no-weldless fittings)
- Designed for 1/2bbl to 1bbl batches
- 40 gallon total capacity
- 15psi working pressure (always use a 15 psi pressure relief valve)
- Use for pressure transfers
- Use for pressure fermentation
- Use as a brite tank
- Etched volume markings
- 24" wide by 46¨ tall
- Fully polished finish
Lid Includes:
- Stainless band clamp for attaching the lid
- Completely removable lid for easy cleaning
- 4" TC modular top port
- Allows for hop additions, temp control coil, top sight glass, etc
- (3) 1.5" TC ports:
Body Includes:
- Huge 2" TC bottom dump with butterfly valves (no more stuck yeast dumps)
- 1.5" TC racking port with butterfly valve
- 1.5" TC sample valve (for taking gravity readings)
- 1.5" TC dial thermometer
- Bracing shelf is included with the CF30