100% Solids Fast Cure Epoxy Floor Coating - US100CLRFC
- Fast-curing 100% solids formula for quick installations and minimal downtime
- Ideal for 1-day installations of epoxy flake flooring
- Retains all the exceptional qualities of the standard US100CLR formula
- Ideal for high-traffic commercial and industrial environments
- Superior adhesion, durability, and a flawless, seamless finish
- Self-leveling properties ensure consistent results and a perfect base for decorative flooring
- Excellent resistance to chemicals, wear, and high traffic
- Compatible with a range of decorative additives for custom designs
- Low VOC content for healthier indoor air quality and eco-friendly installations
🚚 Free shipping to the contiguous United States.
RESINUS US100CLRFC Fast-Curing Epoxy Floor Coating
US100CLRFC is a high-performance, fast-curing epoxy floor coating that retains all the exceptional qualities of the standard US100CLR formula. Designed for efficiency, quick installations, and fast return to service, this 100% solids product provides superior adhesion, exceptional durability, and a flawless finish, making it ideal for high-traffic commercial and industrial environments.
Product Highlights
- 100% solids composition delivers superior strength, adhesion, and a durable, long-lasting flooring system
- Fast curing time enables quicker turnaround and one-day installations, minimizing downtime and disruption
- Formulated for application in lower temperature environments, offering versatility for use in a wide range of climates and seasons
- Self-leveling properties ensure a seamless, consistent finish and provide a durable foundation for metallic and decorative epoxy flake floors
- Excellent resistance to chemicals, wear, and high traffic, making it suitable for high-traffic commercial, industrial, and residential settings
- Compatible with a range of decorative additives for custom flooring designs
- Low VOC content contributes to healthier indoor air quality and allows for safer, more environmentally-friendly installations
Ideal Applications
- 1-Day decorative epoxy flake flooring
- Metallic epoxy floor systems (base only)
- High-traffic commercial and industrial environments
- Chemical-resistant industrial flooring
- Smooth, seamless surface coatings
- Projects with tight timelines or one-day installation requirements
- Environments with lower ambient temperatures
Instructions
Proper surface preparation is essential for the optimal performance of US100CLRFC. The concrete substrate must be clean, dry, and free of any contaminants. It should be prepared to a Concrete Surface Profile (CSP) of 2-3, using methods such as diamond grinding or shot blasting. New concrete must be cured for a minimum of 28 days prior to application.
Condition the product to 65-85°F for best results. If adding color, mix it into Part A before combining with Part B. Mix the components at a 2:1 ratio using a low-speed drill, pouring the material in a 12-18 inch bead and spreading it evenly with a notched squeegee. Back-roll the surface to distribute the product and avoid application lines.
Avoid application at temperatures below 40°F or above 95°F, and in conditions where humidity exceeds 85% or the temperature is less than 5°F above the dew point. Ensure proper ventilation during installation and curing for optimal results and safety.
For detailed application instructions, please refer to the Technical Data Sheet.
- Primer Coat: 100 sq. ft. per gallon
- Solid Color Base Coat: 100 sq. ft. per gallon
- Flake Floor Base Coat: 150 sq. ft. per gallon
- Metallic Floor Base Coat: 50 sq. ft. per gallon
- 3 Gallon Kits (2 Gallons Part A + 1 Gallon Part B)
- Mix Ratio: 2 Parts A to 1 Part B by Volume
- Solids content by volume: 100%
- Mix ratio: 2 parts A to 1 part B by volume
- VOC (mixed): < 30 g/L
- Pot life: 10 minutes (at 75°F)
- Taber abrasion: 28 mg loss
- Adhesion to concrete: 290 psi
- Compressive strength: 18,400 psi
- Flexural strength: 14,430 psi
- Hardness (Shore D): 80
- Tensile strength: 8,400 psi
- Tensile elongation: 2.4%
How does US100CLRFC compare to the standard US100CLR in terms of durability?
A: US100CLRFC offers the same exceptional durability and performance as the standard US100CLR, with the added benefit of faster curing times.
What is the coverage rate of US100CLRFC?
A: The coverage rate for US100CLRFC varies depending on the application. As a primer coat, it covers approximately 100 sq. ft. per gallon. For a solid color base coat, it also covers around 100 sq. ft. per gallon. When used as a base coat for flake floors, it covers about 150 sq. ft. per gallon, and for metallic floors, it covers roughly 50 sq. ft. per gallon.
How long does US100CLRFC take to cure?
A: US100CLR is typically dry to the touch within 2-3 hours at 75°F (24°C). Light foot traffic can be allowed after 8 hours, and heavy traffic or equipment can be permitted after 48 hours. Full cure is achieved in 5-7 days.
Can I apply US100CLRFC over previously coated surfaces?
A: Yes, US100CLRFC can be applied over existing coatings after proper surface preparation. The surface must be clean, dry, and mechanically abraded to ensure adequate adhesion.
Is US100CLRFC suitable for outdoor use?
A: While US100CLRFC can be used outdoors, it is not UV stable and may yellow or chalk over time when exposed to direct sunlight. For outdoor applications, it is recommended to use a UV-resistant topcoat like RESINUS US85POLY or RESINUS USHWU.
How do I clean and maintain a floor coated with US100CLRFC?
A: To clean a floor coated with US100CLRFC, sweep or vacuum regularly to remove loose debris. For a deeper clean, use a mild soap solution and a soft-bristled brush or mop. Avoid using harsh chemicals or abrasive cleaning tools that may damage the coating.
Can I apply US100CLRFC in cold temperatures?
A: Yes, US100CLRFC is formulated for use in lower temperature environments, making it suitable for year-round installations.
Is US100CLRFC VOC compliant?
A: Yes, US100CLRFC is VOC compliant with less than 30 g/L, making it suitable for use in states and regions with strict VOC regulations.
How long should I wait before applying a second coat or topcoat?
A: You should wait until the first coat of US100CLRFC is dry to the touch, which is typically 2-3 hours at 75°F (24°C). However, for optimal intercoat adhesion, it is recommended to apply the second coat or topcoat within 24 hours.