DESCRIPTION
RockRose™ Car and Window Tint has proven results on our tint blocking UV light, Infrared Rejection (IRR) and high heat rejections. Depending on which VLT (visible light transmission) percentage you choose you’ll have different rates of blocking the harmful rays. The lower the percentage VLT (5%) the darker the tint is in color and a higher percentage of blocking that you will receive. Each VLT percentage will help with the following: minimizing cabin heat, blocking Infrared Rays, and providing solar energy rejection.
Features
✓ Tint Type: Air Nano Ceramic 2PLY
✓ Tint Thickness: 2MIL
✓ Tint Material: Ultra-Clear
✓ Warranty: 10 Year Limited
✓ UV = Ultra Violet Light Block
✓ IRR = Infrared Rejection 95%
✓ TSER = Total Solar Energy Rejection
INSTRUCTIONS: Step 1. Measure the size of the car glass, the length and width of each one plus more than 3 cm, so as not to install the film does not conform to size.
Step 2.A clean window is vital a successful factor, so keep window or glass clean.
Step 3. Remove the transparent backing sheet from Film. Cover the surface of the whole film with water. This helps to prevent the film becoming tangled and sticking
Step 4. Pick your film up and apply to your window (Please MAKE SURE you have removed the backing sheet before you apply to the window and glass). Soap and water on film and glass can make it slide to the correct position.
Step 5. And repeat scraper process, using the scraper to push any remaining moisture or bubbles to the edge of the window. Much easier than Wall Decals.
Step 6. Finally use the paper towels to dry the window and the frame, being carefully not to lift the film at the edges or corners.
NOTE: 1. Before installing, please check the film carefully, if you find any creases, tears or other defects, please contact us immediately for advice. Don’t remove the backing sheet or attempt to fit your film.
We are unable to accept returns or provide refunds if installation has been attempted.
