PRODUCT:

Superseded by Novatuff-100. AES-100, 2-part Flexible Epoxy Roof Coating System, Class-A Fire Rated, 82% Solids. 20-Gallon Kit. Price/Kit. (5G A plus 5 pails each with 3G inside 5G pails)

Ordering Notes:

• Specify Color before Adding to Cart.
• SPECIAL ORDER ITEM - NON-RETURNABLE
• FLAMMABLE ITEM / MUST SHIP VIA UPS GROUND OR FREIGHT

Description:

AES-100 is a flexible two-part epoxy coating designed to the best possible long-term protection and waterproofing. It can greatly extend roofing life in the harshest environments.

AES-100 protects and waterproofs all types of roofing including polyurethane foam roofs, built-up, single ply, concrete, plywood and single ply roofing of TPO, PVC, etc. AES-100 has tensile strength of 1650 PSI, with 175% elongation.

FEATURES:

• Waterproofing Grade Coating with UV protection.
• Withstands Ponding Water and Immersion.
• Passes Class-A External Fire Resistance Protection Testing (ASTEM E-108).
• Provides a secure barrier to water penetration.
• Adheres well, even to damp surfaces, without priming (some metal should be primed for rust proofing).
• Withstands attacks from most chemicals, traffic, and severe environments.
• Retains flexibility in sub zero conditions.
• Extremely hail resistant.
• Glossy finish provides very high reflection (110 Solar Reflectence Index, far superior to any acrylic), reducing heat and lowering energy costs.
• Surface temperature will not exceed 10ºF above ambient.
• Glossy high-density finish is very resistant to dirt pick-up and washes clean after rains.
• 10 yr. extendable manufacturers warranty available for roofs.
• EPDM/TPO/PVC Roof Specification
• Modified Granulated Bitumen Specification
• Modfifed Smooth Bitumen Specification
• Polyurethane Foam Specification

COVERAGE / APPLICATION RATE:

• READ PRODUCT DATA SHEET AND MSDS SHEETS BEFORE OPENING AND USE.
• AES-100 can be applied by air-less spray equipment, brush, or roller at approximately 100-sq. ft. per gallon. Very rough or porous surfaces may require up to a total of 3 gallons per 100 square feet in the first coat. Read Product Data Sheet for details.
• A two-coat application is recommended to help insure complete protection. Surfaces subject to significant movement or other difficult conditions may require heavier applications and the use of reinforcement fabrics. All penetrations or transitions of surface materials should be use reinforcement fabrics.
• Dry Film Application Rate: To yield dry film of 13.0 mils, apply 100 Sq. Ft/gallon.

TYPICAL PROPERTIES AND CURING TIMES:

• Product Data Sheet

HAIL TESTING:

• Polyurethane foam and metal samples where coated at 23 mils while impacted with 2-1/2 inch hailstone projectiles at a rate of speed of 79.8 mph and 57.48 ft.- lbs. respectively. Results shown to be conclusive that at the given thickness the polyurethane foam insulation and steel roof panels where undamaged by impact with 2-1/2- inch sized artificial hailstones. All testing results found by HAAG engineering co.

COLD WEATHER:

• Manufacturer recommends AES-100 be installed when temps are 37 degrees F and rising with no freeze forcasted for a minimum of 48 hours. Wind and cloud cover will affect the cure times as well. Typical cure time at 40 degrees is 12-24 hours, 12 is optimum conditions breezy and sunny. Product is Freeze Sensitive before application and must be stored to prevent freezing.

Options:

• Standard in White, Tan, Light Tan and Nickel Gray and other color by special order.

PACKAGING OPTIONS:

• 4 gallon kit (1G-A and 3G-B)

CAUTIONS:

• Personal protection required. Read MSDS sheet prior to opening and using.

More Product Information:

• MSDS Sheet
• Product Data Sheet
• Product Mixing and Application Guidelines (EXAMPLE)