Product:

J-Drain # SWD-12, 12-inch high x 165 foot Foundation Wall/Turf Collector Site Water Drain. Drain flows up to 30 gallons/minute/ft² width. Price/Roll.

DESCRIPTION:

J-Drain SWD, Site Water Drains use a 3D Drain core wrapped with non-woven filter fabric. Drain SWD-12 is designed for efficiently draining water away from in turf areas and for foundation walls, basement walls, retaining walls, roadway edges and more. Its filter cover retains soil particles while allowing water to pass through the drain core for easy removal. This system is economical and designed to improve upon and replace conventional gravel covered perforated drain pipe (french drain). The filter fabric has a 70mm sieve size.

INSTALLATION:

Optional J-CLIPS are use to hold the SWD vertically against the foundation wall. Optional J-TAPE is used to connect pieces. See Architectural Spec for more details.

SEE PHOTO OF INSTALLATION

SPECIFICATIONS:

• Size (ft): 12 inch x 165 roll (also available in 12 inch x 165 foot rolls
• Thickness (in): 1 (2.54 cm)
• Compressive Strength (psf): 9,500
• Core Flow (gal/min/ft of length): 30 (Hydraulic Gradient=.1)
• Cover Fabric Flow (gal/min/ft): 140
• Cover Fabric type: Spun Bond Grey Polyester

FEATURES:

• Easy to install
• Polypropylene drain core
• Filters fine particles
• Ensures drainage efficiency even with irrigated areas

OPTIONS:

• Roll Size: 6 inch, 18 inch, 24 inch high.
• Connection fittings include END-CAP, END-OUT, SIDE-OUTLET, CORNER and SPLICE. See Product DataSheet for details.

More Product Information:

• Product Datasheet
• Safety Datasheet
• End Termination Sheet