Fast delivery
Get in as fast as 1 hour
It’s all local
Shop your favorites
Direct chat
Connect with shoppers
Spectracide Detection & Killing Stakes, Termite
Spectracide Detection & Killing Stakes, Termite
5 each
100% satisfaction guarantee
Place your order with peace of mind.
Recent reviews
May 2024
Order delivered in 38 min
Customer since 2019
Columbus, OH
May 2024
Order delivered in 57 min
Customer since 2023
Columbus, OH
May 2024
Order delivered in 27 min
Customer since 2020
Newark, OH
About
Ingredients
Active Ingredient: Sulfluramid (0.01%), Other Ingredients: (99.99%)
Directions
Read entire label & instruction manual before use. It is a violation of Federal law to use this product in a manner inconsistent with its labeling. For outdoor use around the home. 1. Gather together: Spectracide Terminate Termite Detection & Killing stakes and locator shields, tape measure, graph paper, auger, power drill (optional). 2. Determine the number of stakes you need. The number of stakes needed is determined by the distance around the outside of your house. To estimate, use the square footage of your home including your garage, attached decks, patios and porches. Home designs vary, but if you know the approximate square footage of your home, the chart will help you choose the number of stakes you need. One-story home up to 1,200 sq ft, two-story home up to 1,500 sq ft; number of staked needed: 10 stakes. One-story home 1,200 to 2,500 sq ft or more, two-story home 1,500 sq ft to 3,000 sq ft or more; number of stakes needed: 20 stakes. 3. Prepare drawing of your house. Using the enclosed graph paper, make a drawing of the outside of your house. Note areas on the drawing such as doors, bushes, chimneys, etc, that will help you locate the stakes during the inspection process. Look for areas that are likely to support termite activity and note them on your drawing. These might include areas that retain moisture around downspouts, spigots, air conditioner lines and low areas with poor drainage. The interactive CD-ROM will also lead you through the process. 4. Install the stakes around the house. Using the auger, dig holes 2 to 3 feet away from the foundation and no more than 10 feet apart. Insert the stakes with locator shield in the holes. Place stakes closer together in termite critical areas. Do not use auger for any purpose other than installation of the Termite Detection & Killing Stakes. 5. Inspect the stakes. Check the stakes for termite activity when the pop-up indicator is seen by pulling the stakes from the ground. The locator shields will help make removal of stakes easier. It is important to check the stakes every three months. If you live in an area suspected to Formosan subterranean termites, the frequency of stake inspection should be increased to one a month. Look for signs that the bait has been eaten or that termites are present in the stake. If evidence of termite activity is found in any stake, take the following steps: 1) Replace the active stake with a new stake; 2) Install additional stakes (three or more) within one foot of the infested stake; and 3) Note the date, location and the additional stakes on your drawing. All stakes must be replaced or removed every 12 months. Be sure to wash your hands thoroughly after completing the inspection. Do not use more than 20 stakes per home. Storage and disposal: Storage: Store in a cool, dry place. Disposal: If empty: Do not reuse this container. Place in trash or offer for recycling if available. If partly: Call your local solid waste agency for disposal instructions.
Warnings
Do not allow children or pets to play with stakes. animals. Hazards to humans and domestic animals. Harmful if absorbed through skin. Avoid contact with skin, eyes or clothing. Wash hands thoroughly with soap and water after handling. First Aid: If on skin or clothing: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a Poison Control Center or doctor for treatment advice. Have the product container or label with you when calling a Poison Control Center or doctor or going for treatment. Buyer assumes all responsibility for safety and use not in accordance with directions.
About
Ingredients
Active Ingredient: Sulfluramid (0.01%), Other Ingredients: (99.99%)
Directions
Read entire label & instruction manual before use. It is a violation of Federal law to use this product in a manner inconsistent with its labeling. For outdoor use around the home. 1. Gather together: Spectracide Terminate Termite Detection & Killing stakes and locator shields, tape measure, graph paper, auger, power drill (optional). 2. Determine the number of stakes you need. The number of stakes needed is determined by the distance around the outside of your house. To estimate, use the square footage of your home including your garage, attached decks, patios and porches. Home designs vary, but if you know the approximate square footage of your home, the chart will help you choose the number of stakes you need. One-story home up to 1,200 sq ft, two-story home up to 1,500 sq ft; number of staked needed: 10 stakes. One-story home 1,200 to 2,500 sq ft or more, two-story home 1,500 sq ft to 3,000 sq ft or more; number of stakes needed: 20 stakes. 3. Prepare drawing of your house. Using the enclosed graph paper, make a drawing of the outside of your house. Note areas on the drawing such as doors, bushes, chimneys, etc, that will help you locate the stakes during the inspection process. Look for areas that are likely to support termite activity and note them on your drawing. These might include areas that retain moisture around downspouts, spigots, air conditioner lines and low areas with poor drainage. The interactive CD-ROM will also lead you through the process. 4. Install the stakes around the house. Using the auger, dig holes 2 to 3 feet away from the foundation and no more than 10 feet apart. Insert the stakes with locator shield in the holes. Place stakes closer together in termite critical areas. Do not use auger for any purpose other than installation of the Termite Detection & Killing Stakes. 5. Inspect the stakes. Check the stakes for termite activity when the pop-up indicator is seen by pulling the stakes from the ground. The locator shields will help make removal of stakes easier. It is important to check the stakes every three months. If you live in an area suspected to Formosan subterranean termites, the frequency of stake inspection should be increased to one a month. Look for signs that the bait has been eaten or that termites are present in the stake. If evidence of termite activity is found in any stake, take the following steps: 1) Replace the active stake with a new stake; 2) Install additional stakes (three or more) within one foot of the infested stake; and 3) Note the date, location and the additional stakes on your drawing. All stakes must be replaced or removed every 12 months. Be sure to wash your hands thoroughly after completing the inspection. Do not use more than 20 stakes per home. Storage and disposal: Storage: Store in a cool, dry place. Disposal: If empty: Do not reuse this container. Place in trash or offer for recycling if available. If partly: Call your local solid waste agency for disposal instructions.
Warnings
Do not allow children or pets to play with stakes. animals. Hazards to humans and domestic animals. Harmful if absorbed through skin. Avoid contact with skin, eyes or clothing. Wash hands thoroughly with soap and water after handling. First Aid: If on skin or clothing: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a Poison Control Center or doctor for treatment advice. Have the product container or label with you when calling a Poison Control Center or doctor or going for treatment. Buyer assumes all responsibility for safety and use not in accordance with directions.
Departments
Why Instacart?
Delivery in as little as 2 hours
Shop local stores at great prices
