ITEM #: 12997444The locking Model 1076 series Wi-Tile enclosure provides a convenient way to recess and secure Wi-Fi and Small Cell APs from all leading vendors in a hard lid ceiling or wall. A cutout is made in the ceiling/wall and the all metal enclosure is fastened into the wall using adjustable wall bridges. The AP is mounted in the back-box or in the door (depending on enclosure style). Interchangeable retrofit doors permit vendor and technology migrations, and simplify moves, adds, and changes. Unique wall br idge simplifies installation in almost any type of hard wall/ceiling. UL listed for A.C. line powering and installation in the plenum space. See configuration guide for AP specific doors.
Features- FEATURES:
- Locking, recessed wall or hard ceiling mounting solution to secure APs from most vendors
- Provides an aesthetic, professional finish
- Fully-hinged locking door, keyed alike. Interchangeable doors permit simple migration to new APs and antenas
- Shallow back-box (3 in.) simplifies installation in walls and ceilings
- Enclosure back-box is effective dust barrier to simplify ICRA compliance in hospitals
- SPECIFICATIONS:
- Design: recessed hard lid ceiling or wall enclosure designed for APs wireless multimedia gateways. Designed for pre-existing drywall, sheetrock, gypsum board, plaster and lathe walls or ceiling (remodeling or old construction). Designed for all leading vendors’ APs and antennas, as identified in Oberon’s Model 1076 con figuration guide
- Performance: UL listed and designed to meet NEC300-22 and 300-23 for plenum installations. UL listed for AC. line voltage
- Locking, fully hinged interchangeable door for migration to other APs. Keyed alike
- Includes firestop foam kitfor cable egress. Large enough for two Cat 6A cables
- 1 in. trade size knockouts on two walls, junction box knockout in back-box
- Construction: 16 ga. Galvanized steel back-box, 14 ga. textured white powder coated steel door and flange; back box is effective as a dust barrier for ICRA procedure compliance
- Model 1076-WA only: Paintable UL-945VA White ABS Plastic dome, virtually transparent to wireless signals
- Model 1076-CP only: UL 94-5VA clear polycarbonate dome, virtually transparent to wireless signals
- Maximum weight in enclosure is 25 lbs.
- Max. Operating temperature of AP should be de-rated by 10C inside the enclosure
- Flange is 15 x 15 in. (381 x 381 mm). Back box is 12.75 x 12.75 x 3 in. (324 x 324 x 77 mm)
- SAFETY:
- UL 50 listed, T1, for indoor use only
- USL - Investigated using requirements contained in Standard UL 50 - Twelfth Edition, and UL 50E - First Edition
- CNL - Investigated using requirements contained in Canadian Standard CSA/C22.2 No. 94.1 and 94.2
- UL 2416, Audio/Vdeo, Information and Communication Technology Equipment Cabinet, Enclosure & Rack Systems
- CSA C22.2 NO. 60950-1-07 + Amd. 1 Amd. 2 Information Technology Equipment -- Safety. Part 1, General Requirements
- INCLUDES:
- (2) Wall bridges
- (1) Universal "T-bar" mounting bracket
- (4) No. 6-32 Hex Nuts
- (4) No. 6-32 Eye Bolts
- (2) Velcro Dots
- (2) Keys for lock
- (1) Fireblock cable egress kit
- Caddy Speed Link support wire
- Installation instructions
- ACCESSORIES:
- 39-BLANK-PLATE: Models 1047(-T)
Specification Description 15" x 15" white powder-coated steel flange and door
12.75" x 12.75" x 3" deep, galvanized steel back-box, RoHS compliant
Knockouts for single gang j-box, (2) keystone jacks, (2) 0.75" trade conduit connector
Maximum weight to be installed inside the uit is 25 lbs.
De-rate upper operating temperature limit from +50C to +40C when AP in the enclosure
Enclosure must be supported by the tile bridges; when installed in the ceiling, enclosure must be supported by the building structure, independent of the suspended ceiling
This listing is for Each.
