R.A.J. Electric

The technicians at R. A. J. electric are, honest, prompt, reasonably priced, and always able to resolve issues.
I highly recommend for your electrical needs.

I hired RAJ for a generator service contract. The initial visit was excellent, however, the 2nd visit was anything but. The electrician who was out used loose copper wires to wire around a fuse. Sold me a battery that he installed without even testing to see if the system works. When I called the office after I realized some time later it wasnt doing its power cycle, the office said the tech reported that there was no transfer switch installed. This is ridiculous because the switch is located next to the breaker in the garage and the first tech who was out obviously found it. Never received a call or a follow up until I figured out the generator wasnt working.

I never write bad reviews BUT before you hire RAJ please read reviews... I paid and ordered a generator the end of April. I am totally aware of the back log in getting generators but.... its now September 20, 2021 and I am just informed that my generator will be installed December 6th. They came on 9/17 and did the wiring and added a electrical box but RAJ had told me that this was to be my install date so I assumed generator and concrete slab at that time. Did not hear about the December date until today 9/20.

I have friends that ordered a month ago and have already had theirs installed by Reliable Power Systems. Same generator as I am getting. RAJ is the worst with communication and customer service. I wish I had not been trying to help out a local Jupiter company. Bis Mistake.

They installed my replacement generator. They hooked up the power to the wrong parts of my house. Took them six months to come and supposedly fix it. Power went off recently , the power is still to the wrong parts of house. I have been calling for weeks. They say we will call you back today and they never do. They say the manager is out of the office. Worst service I have ever had

For anyone wanting to install a generator, we purchased ours through Costco and RAJ Electric. RAJ Electric is fantastic to deal with! Raoul and his Staff are great and will answer all questions.

Above and beyond !

Thank-you Jonathan and Victor, great job this afternoon !

We had Angel from RAJ Electric visit with us to service our generator this morning. Great guy from a good company. They also did the Install. He was thorough, went through everything step by step so we understood. Answered our many questions. Very patient. We appreciate his assistance and highly recommend Angel and RAJ Electric to others. We have had no issues with this company. Thank you RAJ Electric. Keep up the good work.

Great communication including appointment reminders, technician location, en route tracking and ETA. Jonathan was very polite, knowledgeable, professional and satisfied my electrical needs beyond expectation. Great Job. Thanks

My husband and I recently hired RAJ Electric to install a generator. I was VERY impressed with their attention to detail. They kept me in the loop every step of the way. When they said they would be at my house...they were there, spot on! The technicians were friendly, professional and delightful to have around. Most importantly, they were great at installing the generator! It was a pleasure working with the office staff, technicians, and management. We highly recommend RAJ Electric!

Unfortunately, I wasn't at home at the time to go over the work they did and my poor wife knows less than I do. I had them install a transfer switch for my generator. They didn't ask which receptacle I needed nor did they actually test the switch at all and I'll explain what I mean by that below.

When I called them on the wrong receptacle they told me to find an adapter. Ok, that's partly on me I should have stipulated but a little more help would have been nice, perhaps they could have asked rather than simply assuming.

After quite a bit of research, I found the right adapter. The adapter I needed was the following:

L14-30P 30-Amp 4 Prong Locking Plug to CS6364 50-Amp Locking Female

Perhaps that will help someone in the future...

When Irma hit I soon realized that the metal plate in the electrical panel (the one that makes certain the main is off before the generator is engaged) wouldn't let me engage the breaker from the switch, the plate was too big and didn't provide enough clearance.

I had to remove the cover from the panel and remove the plate to turn on the breaker. Sometimes it's the little things that make customers feel like you care at all... seriously... take five minutes, check your work...

If I knew electrical or felt safe doing it myself I wouldn't have called to begin with. So they weren't horrible by any means, the lady in the office is extremely nice. I'll be going with someone else the next time though.